本參考設計展示了伍爾特電子開發的一款緊湊型輔助電源設計,提供范圍在+15 V到+20 V之間可調的單極電壓,同時支持高達6 W的最大輸出功率,輸入電壓則可覆蓋9V到18 V。
This reference design presents an extremely compact auxiliary power supply by Würth Elektronik providing a unipolar voltage adjustable between +15 V and +20 V. It sources a maximum output power of up to 6 W while covering an input voltage range from 9 to 18 V.
該設計針對高壓SiC MOSFET和IGBT設備及功率模塊進行了優化,無需柵極驅動負電壓,并且可以輕松集成到柵極驅動系統中。
The design is optimized for driving high-voltage SiC MOSFET and IGBT devices and power modules without a negative gate drive voltage requirement, and can be easily integrated into the gate driver system.
WE-AGDT系列750318114變壓器擁有極低繞組間電容(最低達 6.8 pF),有助于實現高CMTI(共模瞬態抗擾度)等級,從而實現快速的開關轉換,在電動汽車、可再生能源或工業自動化等主流應用中提高效率和功率密度。
The extremely low interwinding capacitance of the WE-AGDT 750318114 transformer down to 6.8 pF helps to achieve high CMTI rating (Common-Mode Transient Immunity). This enables fast switching speeds which can yield efficiency and power density gains, as increasingly required in trending applications in e-mobility, renewable energy or industrial automation.
本文檔還提供了+15 V、+18 V和+20 V輸出電壓的實驗結果。
In this document, experimental results for output voltages of +15 V, +18 V and +20 V are provided.
設計優勢/Key features
緊湊尺寸(電路板A: 27 mm x 14 mm x 14 mm)(電路板B: 40 mm x 14 mm x 13mm)
Small size (Var.A: 27 mm x 14 mm x 14 mm) (Var.B: 40 mm x 14 mm x 13 mm)
輸入電壓范圍:9V-18V
Input voltage range: 9 to 18 V
可調節輸出電壓 Adjustable output voltage
已驗證三種輸出電壓結果:RD002-1: +15V/0V、RD002-2: +18V/0V 與RD002-3: +20V/0V
Validated results for three common output voltages: RD002-1: +15V/0V, RD002-2: +18V/0V and RD002-3: +20V/0V
4 kV初級-次級隔離
4 kV primary-secondary isolation
WE-AGDT變壓器寄生電容僅6.8 pF,支持高CMTI需求
WE-AGDT transformer with only 6.8 pF typ. parasitic capacitance enabling high CMTI
基于LT8302 (ADI Power by Linear) 的PSR反激拓撲
PSR Flyback topology with LT8302 (ADI Power by Linear)
提供兩種物料清單:標準版和AEC-Q認證版
Two BoM variants: Standard and AEC-Q component qualification
兩種PCB布局選項(2層和4層)
Two PCB Layout Variants (2-layer and 4-layer)
典型應用/Typical applications
電動汽車:電動動力總成
E-mobility: electric powertrain
車載和非車載電池充電器
On-board and off-board battery chargers
Industrial drives: AC motor inverter
可再生能源:太陽能逆變器
Renewable energy: solar inverters
Power factor correction (PFC) stages
采用SiC MOSFET的開關電源
Switch-mode power supplies with SiC MOSFETs
應用筆記/Application notes
CN:《RD002-6W單極隔離輔助電源用于SiC MOSFET與IGBT柵極驅動器》
EN:RD002-6W Unipolar isolated auxiliary supply for SiC-MOSFET & IGBT gate driver
-
MOSFET
+關注
關注
150文章
8258瀏覽量
218486 -
SiC
+關注
關注
31文章
3157瀏覽量
64442 -
輔助電源
+關注
關注
2文章
76瀏覽量
16902
原文標題:參考設計 | 6W單極隔離輔助電源 用于SiC MOSFET與IGBT柵極驅動器
文章出處:【微信號:伍爾特電子亞洲,微信公眾號:伍爾特電子亞洲】歡迎添加關注!文章轉載請注明出處。
發布評論請先 登錄
ADUM4135單電源/雙電源高電壓隔離IGBT柵極驅動器技術手冊

UCC5390-Q1 汽車級 17-A 5kv RMS 單通道隔離式柵極驅動器數據手冊

UCC5870-Q1 用于 IGBT/SiC 的汽車級 3.75kVrms 30A 單通道功能安全隔離柵極驅動器數據手冊

UCC23113 具有功能隔離 (1.2kVRMS) 的 4A/5A 單通道光兼容隔離式柵極驅動器數據手冊

UCC5880-Q1 具有高級保護功能的汽車級 20A 實時可變 IGBT/SiC MOSFET 隔離式柵極驅動器數據手冊

UCC23525 具有12V UVLO的 5A/5A、5.7kVRMS、增強型單通道光兼容隔離式柵極驅動器數據手冊

UCC5881-Q1 具有高級保護功能的汽車級 20A 實時可變 IGBT/SiC MOSFET 隔離式柵極驅動器數據手冊

UCC5350L-Q1 用于 SiC/IGBT 的汽車類 ±10A 單通道隔離式柵極驅動器數據手冊

33V單通道數字隔離柵極驅動器 拉/灌6A電流驅動SIC MOSFET及IGBT
采用 LLC 拓撲結構設計隔離式柵極驅動器電源,低成本 LLC 轉換器的設計指南

電隔離柵極驅動器選型指南
使用隔離式 IGBT 和 SiC 柵極驅動器的 HEV/EV 牽引逆變器設計指南

評論