資料介紹
本文分析了控制系統任務的特點,給出了控制系統中各種實時任務模型。分析了
控制系統性能與任務參數之間的關系,給出了參數的設置方法。最后,研究了控制系統中實時任務之間存在關系,包括資源共享、執行順序及一致性限制,給出了處理這些關系的方法。
關鍵詞:實時控制系統,任務模型,資源共享,一致性約束
Abstract: The characteristic of tasks in control systems is analyzed in this paper and the task
models are presented. The relationship between the performance of control system and parameters of tasks is investigated and the method for setting up them parameters is given. Finally, the relationship between tasks is studied. It is pointed that there exist resource sharing, execution order and consistency constraint among tasks. The methods for handling these relationships are given.
Keywords: Real-time Control system, task model, resource sharing, consistency constraint
控制系統性能與任務參數之間的關系,給出了參數的設置方法。最后,研究了控制系統中實時任務之間存在關系,包括資源共享、執行順序及一致性限制,給出了處理這些關系的方法。
關鍵詞:實時控制系統,任務模型,資源共享,一致性約束
Abstract: The characteristic of tasks in control systems is analyzed in this paper and the task
models are presented. The relationship between the performance of control system and parameters of tasks is investigated and the method for setting up them parameters is given. Finally, the relationship between tasks is studied. It is pointed that there exist resource sharing, execution order and consistency constraint among tasks. The methods for handling these relationships are given.
Keywords: Real-time Control system, task model, resource sharing, consistency constraint
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 實時計算機控制系統原理及應用綜述 4次下載
- 怎么樣使用Matlab和PLC設計實時控制系統 25次下載
- 定時任務的發展史是怎么樣的
- DSP控制系統中實時波形的捕獲與分析 11次下載
- VxWorks系統上基于M總線控制系統的設計與實現
- 基于Linux的實時數字控制系統設計
- 基于VxWorks的動中通天線控制系統軟件設計
- VxWorks系統上基于M總線控制系統的設計與實現
- 網絡控制系統中的時延分析
- OPC 實時任務系統動態調度算法的研究與設計The Stud
- 實時任務處理程序設計中“易變的”變量
- 啤酒發酵控制器中的多任務分析與實現
- 啤酒發酵控制器中的多任務分析與實現
- DVS系統硬實時周期任務動態調度算法
- VxWorks系統上基于M總線控制系統的設計與實現
- linux定時任務的用法總結 883次閱讀
- 現場總線控制系統與集散控制系統的對比 2263次閱讀
- 控制系統中開環和閉環如何判斷 3950次閱讀
- 開環控制系統與閉環控制系統的區別 1w次閱讀
- 詳解實時操作系統和非實時操作系統 4958次閱讀
- 在實時控制系統中使用傳感器優化數據可靠性的3個技巧 477次閱讀
- H3C交換機配置定時任務 1859次閱讀
- 實時控制系統的設計挑戰 1528次閱讀
- 如何在SpringBoot項目中實現動態定時任務 1826次閱讀
- 使用GD32的嵌入式實時控制系統 5144次閱讀
- 計算機控制系統的設計步驟 1.5w次閱讀
- 智能電網調度控制系統實時監控與預警的應用 5186次閱讀
- Linux系統中的實時調度器DL調度器的原理是什么?詳細概述 4788次閱讀
- 牙椅控制系統:在控制系統中應用嵌入式操作系統 4790次閱讀
- 基于高檔數控系統的實時多任務實現 1359次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1490次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 93次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 8基于單片機的紅外風扇遙控
- 0.23 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論