資料介紹
In most LCA designs, performance cannot be estimated
with any accuracy until after implementation. This is
because the performance is affected by routing delays;
and, prior to implementation, these are not known. However,
in adders and counters using the XC4000E dedicated
carry logic, delay estimation is possible.
The carry path in an adder uses dedicated interconnects
between CLBs. These interconnects introduce a fixed
delay, even when the carry passes from one CLB column to
the next at the top or bottom of the array. This permits the
routing delay to be incorporated into the CLB specifications
published in the data book. Consequently, the propagation
delay through an adder can be calculated directly from the
data book specifications.
with any accuracy until after implementation. This is
because the performance is affected by routing delays;
and, prior to implementation, these are not known. However,
in adders and counters using the XC4000E dedicated
carry logic, delay estimation is possible.
The carry path in an adder uses dedicated interconnects
between CLBs. These interconnects introduce a fixed
delay, even when the carry passes from one CLB column to
the next at the top or bottom of the array. This permits the
routing delay to be incorporated into the CLB specifications
published in the data book. Consequently, the propagation
delay through an adder can be calculated directly from the
data book specifications.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 4位加法器的構建
- 4位加法器開源分享
- 計算機組成原理、數字邏輯之加法器詳解
- 加法器設計代碼參考 19次下載
- 12位加法器的實驗原理和設計及腳本及結果資料說明 4次下載
- 基于Skewtolerant Domino的新型高速加法器 8次下載
- 加法器VHDL程序 5次下載
- Xilinx 公司的加法器核 12次下載
- 8位加法器和減法器設計實習報告 134次下載
- FPU加法器的設計與實現 47次下載
- 多位快速加法器的設計
- 應用XC4000E中的專用進位邏輯
- 應用XC4000E中的專用進位邏輯
- 基于XC4000的結構的增強型XC4001E的新特性及其與X
- 性能改進的1 6 位超前進位加法器
- 使用MVVM框架實現一個簡單加法器 876次閱讀
- 基于FPGA實現Mem加法器 653次閱讀
- 基于Verilog的經典數字電路設計(1)加法器 2679次閱讀
- SIMATIC S7-1500 PLC加減計數器簡述 7248次閱讀
- 電子計數器的使用_電子計數器功能 1.4w次閱讀
- 怎么設計一個32位超前進位加法器? 2w次閱讀
- 加法器芯片74ls283中文資料匯總(74ls283引腳圖及功能_極限值及應用電路) 27.5w次閱讀
- 74ls161分頻電路圖大全(脈沖分頻電路\同步加法計數器) 11.5w次閱讀
- 反相加法器原理圖與電路圖 2.1w次閱讀
- 加法器內部電路原理 8.7w次閱讀
- 反相加法器電路與原理 3.3w次閱讀
- 74LS161集成計數器電路(2、3、4、6、8、10、60進制計數器) 45.2w次閱讀
- 加法器電路設計方案匯總(八款模擬電路設計原理詳解) 14.6w次閱讀
- 加法器是什么?加法器的原理,類型,設計詳解 2.4w次閱讀
- 同相加法器電路原理與同相加法器計算 5.7w次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論