The Memory project is a demo program for the Keil MCBSTM32 Board

　　using a ST STM32F103RBT6 Microcontroller.

　　It demonstrates an USB Memory based on USB Mass Storage Class.

　　LEDs are used to display the following：

　　- PB8 ： LED_RD is on when USB Device is performing Read access

　　- PB9 ： LED_WR is on when USB Device is performing Write access

　　- PB10： LED_CFG is on when USB Device is configured

　　- PB11： LED_SUSP is on when USB Device is suspended

　　The USB Memory is automatically recognized by the host PC

　　running Windows which will load a generic Mass Storage driver.

　　The Memory program is available for the following targets：

　　MCBSTM32： configured for on-chip Flash ROM

　　（used for production or target debugging）

　　Note： set jumper J1 to PD2 for debugging