資料介紹
In July 1958, Jack Kilby of Texas Instruments suggested building all of
the components of a circuit completely in silicon [1]. By September 12,
1958, Kilby had built a working model of the first “solid circuit,” the
size of a pencil point. A couple of months later in January 1959, Robert
Noyce of Fairchild Semiconductor developed a better way to connect
the different components of a circuit [2], [3]. Later, in the spring of
1959, Fairchild Semiconductor demonstrated the first planar circuit —
a “unitary circuit.” The first monolithic integrated circuit (IC) was
born, where multiple transistors coexisted with passive components
on the same physical substrate [4]. Microphotographs of the first IC
(Texas Instruments, 1958), the first monolithic IC (Fairchild Semiconductor,
1959), and the recent high performance dual core Montecito
microprocessor (Intel Corporation, 2005) are depicted in Fig. 1.1.
In 1960, Jean Hoerni invented the planar process [5]. Later, in 1960,
Dawon Kahng and Martin Atalla demonstrated the first silicon based
MOSFET [6], followed in 1967 by the first silicon gate MOSFET [7].
These seminal inventions resulted in the explosive growth of today’s
multi-billion dollar microelectronics industry. The fundamental cause
of this growth in the microelectronics industry has been made possible
by technology scaling, particularly in CMOS technology.
The goal of this chapter is to provide a brief perspective on the development
of integrated circuits (ICs), introduce the problem of power
distribution in the context of this development, motivate the use of
on-chip decoupling capacitors, and provide guidance and perspective
to the rest of this book. The evolution of integrated circuit technology
from the first ICs to highly scaled CMOS technology is described in Section
1.1. As manufacturing technologies supported higher integration IC along
with a high performance, high complexity IC (the die size is not to scale).
(a) The first IC (Texas Instruments, 1958), (b) the first monolithic
IC (Fairchild Semiconductor, 1959), and (c) the high performance dual core Montecito microprocessor (Intel Corporation, 2005).
- 【布局優化】基于粒子群算法求解配電網重構matlab源碼
- 旁路電容、電容耦合、退耦等資源匯總下載 9次下載
- 基于模糊理論的配電網資源集群控制系統 6次下載
- 基于配電網格的配電網調度交易機構設計 5次下載
- 冰災下配電網多故障搶修策略 7次下載
- 一種離散學習優化算法在配電網重構中應用 0次下載
- 配電網線損計算 3次下載
- 配電網無功補償雙層優化配 2次下載
- 配電網降壓節能裝置中電容器組的選址定容問題研究 0次下載
- 配電網網架規劃方法 3次下載
- 配電網電容電流超標問題研究 0次下載
- 配電網固定串聯補償多目標優化 0次下載
- 退耦電容 0次下載
- 供配電系統中無功補償電容器的最佳配置 96次下載
- 低壓配電網并聯電容器無功補償優化算法的研究 65次下載
- 退耦電容大小與音質有關嗎 797次閱讀
- 電容器的主要作用 2499次閱讀
- 補償電容器的運行標準 1852次閱讀
- 三個不同值的去耦電容器 1472次閱讀
- 電力電容器的分類及作用 7986次閱讀
- 一文知道配電網和光伏的關系 7304次閱讀
- 如何提高配電網的可靠性措施 7408次閱讀
- 簡要分析大數據在智能配電網中的應用 7847次閱讀
- 主動配電網是什么,與微電網有何不同? 3.3w次閱讀
- 如何自制簡單的夾具來測量電容器的特征參數 5331次閱讀
- 歐洲配電網智能化發展中的控制技術 1370次閱讀
- 怎樣分辨超級電容器?超級電容器和電池的區別?什么是超級電容器? 2w次閱讀
- 去耦電容器的應用解決方案 1964次閱讀
- 電容器檢測技巧分享 2437次閱讀
- 農村配電網的防雷保護和過電壓保護 1271次閱讀
下載排行
本周
- 1DC電源插座圖紙
- 0.67 MB | 2次下載 | 免費
- 2AN158 GD32VW553 Wi-Fi開發指南
- 1.51MB | 2次下載 | 免費
- 3AN148 GD32VW553射頻硬件開發指南
- 2.07MB | 1次下載 | 免費
- 4AN111-LTC3219用戶指南
- 84.32KB | 次下載 | 免費
- 5AN153-用于電源系統管理的Linduino
- 1.38MB | 次下載 | 免費
- 6AN-283: Σ-Δ型ADC和DAC[中文版]
- 677.86KB | 次下載 | 免費
- 7SM2018E 支持可控硅調光線性恒流控制芯片
- 402.24 KB | 次下載 | 免費
- 8AN-1308: 電流檢測放大器共模階躍響應
- 545.42KB | 次下載 | 免費
本月
- 1ADI高性能電源管理解決方案
- 2.43 MB | 450次下載 | 免費
- 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
- 5.67 MB | 138次下載 | 1 積分
- 3基于STM32單片機智能手環心率計步器體溫顯示設計
- 0.10 MB | 130次下載 | 免費
- 4使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 53314A函數發生器維修手冊
- 16.30 MB | 31次下載 | 免費
- 6美的電磁爐維修手冊大全
- 1.56 MB | 24次下載 | 5 積分
- 7如何正確測試電源的紋波
- 0.36 MB | 17次下載 | 免費
- 8感應筆電路圖
- 0.06 MB | 10次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935121次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233088次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73810次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65988次下載 | 10 積分
評論