具有 Oring、符合 AdvancedMC 標準的 8.5V 至 15V 雙通道熱插拔控制器
| FET | External |
| Vin (Min) (V) | 8.5 |
| Vin (Max) (V) | 15 |
| Vabsmax_cont (V) | 17 |
| Current limit (Min) (A) | 0.01 |
| Current limit (Max) (A) | 500 |
| Overcurrent response | Circuit breaker, Current limiting |
| Fault response | Auto-retry, Latch-off |
- ATCA AdvancedMC? Compliant
- Full Control for Two AdvancedMC Modules
- Independent 12-V Current Limit and Fast Trip
- 3.3-V and 12-V FET ORing for MicroTCA
- Internal 3.3-V Current Limit and ORing
- Power Good and Fault Reporting Through I2C
- I2C Programmable Fault Times and Current Limits
- FET Status Bits for all Channels
- 36-Pin PQFN Package
- 3-V and 12-V Interlock for AdvancedMC Compliance
The TPS2359 dual-slot hot-plug controllers perform all necessary power interface functions for two AdvancedMC? (Advanced Mezzanine Card) modules.
Two fully integrated 3.3-V channels provide inrush control, over-current protection, and FET ORing. Two 12-V channels provide the same functions using external FETs and sense resistors. The 3.3-V current limits are factory set to AdvancedMC? compliant levels and the 12-V current limits are programmed using external sense resistors. The accurate current sense comparators of the TPS2359 satisfy the narrow ATCA? AdvancedMC? current limit requirements.
