| Regulated outputs (#) | 6 |
| Vin (Min) (V) | 1.5 |
| Vin (Max) (V) | 6.5 |
| Iout (Max) (A) | 0.6 |
| Rating | Catalog |
| LDO | 4 |
| Iq (Typ) (mA) | 2.4 |
| Features | I2C Control |
| Processor name | S3C24x |
| Processor supplier | Samsung |
| Shutdown current (ISD) (Typ) (uA) | 9 |
| Switching frequency (Typ) (kHz) | 2250 |
| Configurability | Hardware configurable |
- Up To 95% Efficiency
- Output Current for DC-DC Converters:
- TPS65050, TPS65054: 2 × 0.6 A
- TPS65051, TPS65052 and TPS65056: DCDC1 = 1 A; DCDC2 = 0.6 A
- Output Voltages for DC-DC Converters
- Externally Adjustable and Fixed Versions Available
- Digital Voltage Selection for the DCDC2
- VI Range for DC-DC Converters
From 2.5 V to 6 V - 2.25-MHz Fixed-Frequency Operation
- Power Save Mode at Light Load Current
- 180° Out-of-Phase Operation
- Output Voltage Accuracy in PWM Mode ±1%
- Total Typical 32-μA Quiescent Current for Both DC-DC Converters
- 100% Duty Cycle for Lowest Dropout
- Two General-Purpose 400-mA, High PSRR LDOs
- Two General-Purpose 200-mA, High PSRR LDOs
- VI range for LDOs From 1.5 V to 6.5 V
- Digital Voltage Selection for the LDOs
All trademarks are the property of their respective owners.
The TPS6505x family of devices are integrated power-management ICs for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS6505x devices provide two highly efficient, 2.25-MHz step-down converters targeted at providing the core voltage and I/O voltage in a processor-based system. Both step-down converters enter a low-power mode at light load for maximum efficiency across the widest possible range of load currents. For low noise applications, the devices can be forced into fixed-frequency PWM mode by pulling the MODE pin high. The TPS6505x devices also integrate two 400-mA LDO and two 200-mA LDO voltage regulators. Each LDO operates with an input voltage range from 1.5 V to 6.5 V, allowing them to be supplied from one of the step-down converters or directly from the main battery.
For all available packages, see the orderable addendum at the end of the data sheet.
