2MHz、1A/1A 雙路降壓轉換器 + 低壓降線性穩壓器
| Regulated outputs (#) | 3 |
| Vin (Min) (V) | 0 |
| Vin (Max) (V) | 5.5 |
| Iout (Max) (A) | 1 |
| Rating | Catalog |
| LDO | 1 |
| Iq (Typ) (mA) | 0.07 |
| Features | Comm Control, Power Sequencing |
| Shutdown current (ISD) (Typ) (uA) | 130 |
| Switching frequency (Typ) (kHz) | 2000 |
| Configurability | Factory programmable |
- Two Highly Efficient Programmable Buck Regulators
- Integrated FETs with Low RDSON
- Bucks Operate with Their Phases Shifted to Reduce
the Input Current Ripple and Capacitor Size - Programmable Output Voltage via the SPI interface
- Overvoltage and Undervoltage Lockout
- Automatic Internal Soft Start with Power-on Reset
- PFM Mode for Low-Load, High-Efficiency Operation
- Low-Dropout LDO 3.0V, 250 mA
- SPI-Programmable Interrupt Comparator (2.0V to 4.0V) to
Monitor VIN
Key Specifications
- LM10502 - Programmable Buck Regulators:
- Buck 1: 1.1V to 3.6V; 1A
- Buck 2: 0.7V to 1.335V; 1A
- ±3% Feedback Voltage Accuracy
- Up to 95% Efficient Buck Regulators
- 2MHz Switching Frequency for Smaller Inductor Size
- 2.5 7times; 2.5 mm, 0.5 mm Pitch DSBGA Package
All trademarks are the property of their respective owners.
The LM10502 are advanced PMUs each containing two configurable, high-efficiency buck regulators for supplying variable voltages. The device is ideal for supporting ASIC and SOC designs for Solid-State and Flash drives.
The LM10502 operate cooperatively with the application ASIC to optimize the supply voltage for low-power conditions and Power Saving modes via the SPI interface. It also supports a 250 mA LDO and a programmable Interrupt Comparator to monitor VIN.
