3V 增強型 CMOS 四路差動線路接收器
| Number of receivers | 4 |
| Number of transmitters | 0 |
| Duplex | Half |
| Supply voltage (Nom) (V) | 3.3 |
| Signaling rate (Max) (Mbps) | 30 |
| Fault protection (V) | -0.5 to 7 |
| Common mode range | -7 to 7 |
| Number of nodes | 32 |
| Isolated | No |
| ICC (Max) (mA) | 0.1 |
| Rating | Military |
| Operating temperature range (C) | -55 to 125 |
- Comparable to Both TIA/EIA-422 and ITU-T V.11 Standards
- Low Power CMOS Design (30 mW typical)
- Interoperable with Existing 5V RS-422 Networks
- Receiver OPEN Input Failsafe Feature
- Pin Compatible with DS26C32AT
All trademarks are the property of their respective owners.
The DS26LV32A is a high speed quad differential CMOS receiver that is comparable to TIA/EIA-422-B and ITU-T V.11 standards, but with a specified common mode voltage range of -0.5V to +5.5V due to the lower operating supply voltage of 3.0V to 3.6V. The TRI-STATE enables, EN and EN, allow the device to be active High or active Low. The enables are common to all four receivers. The receiver output (RO) is specified to be High when the inputs are left open. The receiver can detect signals as low as ±200mV over the common mode range of -0.5V to +5.5V. The receiver outputs (RO) are compatible with TTL and LVCMOS levels.
