--- 產品詳情 ---
Resolution (Bits) | 16 |
Number of channels (#) | 4 |
Samples/sec (MSPS) | 50 |
Supply voltage (Max) | 3.3 |
Operating temperature range (C) | 0 to 85 |
Output data format | CMOS Selectable, Standard LVDS |
- Four-Channel CCD/CMOS Signal: 2-Channel,
3-Channel, and 4-Channel Selectable - Power Supply: 3.3 V Only, Typ
(Built-in LDO, 3.3 V to 1.8 V) - Maximum Conversion Rate:
- VSP5620: 35 MSPS
- VSP5621: 50 MSPS
- VSP5622: 70 MSPS
- 16-Bit Resolution
- CDS/SH Selectable
- Maximum Input Signal Range: 2.0 V
- Analog and Digital Hybrid Gain:
- Analog Gain: 0.5 V/V to 3.5 V/V in
3/64-V/V Steps - Digital Gain: 1 V/V to 2 V/V in
1/256-V/V Steps
- Analog Gain: 0.5 V/V to 3.5 V/V in
- Offset Correction DAC: ±250 mV, 8-Bit
- Standard LVDS/CMOS Selectable Output:
- LVDS:
- Data Channel: 2-Channel
- Clock Channel: 1-Channel
- 8-Bit/7-Bit Serializer Selectable
- CMOS: 4 Bits × 4
- LVDS:
- Timing Generator
- Fast Transfer Clock: One Signal
- Slow Transfer Clock: One Signal
- LED Driver: Three Channels
- Current: 60-mA/Channel Max,
16-Steps/Channel
- Current: 60-mA/Channel Max,
- Timing Adjustment Resolution: tMCLK/48
- Input Clamp/Input Reference Level Internal/
External Selectable - Reference DAC: 0.5 V, 1.1 V, 1.5 V, 2 V
- SPI: Three-Wire Serial
- GPIO: Four-Port
- Power (at 4-channel, LVDS, 3.3 V, without LED Driver):
- VSP5620: 320 mW at 35 MSPS
- VSP5621: 406 mW at 50 MSPS
- VSP5622: 523 mW at 70 MSPS
The VSP5620/21/22 are high-speed, high-performance, 16-bit analog-to-digital-converters (ADCs) that have four independent sampling circuit channels for multi-output charge-coupled device (CCD) and complementary metal oxide semiconductor (CMOS) line sensors. Pixel data from the sensor are sampled by the sample/hold (SH) or correlated double sampler (CDS) circuit, and are then converted to digital data by an ADC. Data output is selectable in low-voltage differential signaling (LVDS) or CMOS modes.
The VSP5620/21/22 include a programmable gain to support the pixel level inflection caused by luminance and a built-in light-emitting diode (LED) driver to adjust the brightness. The integrated digital-to-analog-converter (DAC) can be used to adjust the offset level for the analog input signal. Furthermore, the timing generator (TG) is integrated in these devices for the control of sensor operation.
The VSP5620/21/22 use 1.65 V to 1.95 V for the core voltage and 3.0 V to 3.6 V for I/Os. The core voltage is supplied by a built-in low-dropout regulator (LDO).
為你推薦
-
TI數字多路復用器和編碼器SN54HC1512022-12-23 15:12
-
TI數字多路復用器和編碼器SN54LS1532022-12-23 15:12
-
TI數字多路復用器和編碼器CD54HC1472022-12-23 15:12
-
TI數字多路復用器和編碼器CY74FCT2257T2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS258A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74AHCT1582022-12-23 15:12
-
電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08
-
Buck電路的原理及器件選型指南2023-07-31 22:28
-
100W USB PD 3.0電源2023-07-31 22:27
-
基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02
-
上新啦!開發板僅需9.9元!2023-06-21 17:43
-
參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43
-
千萬不能小瞧的PCB半孔板2023-06-21 17:34