--- 產品詳情 ---
Number of ADC channels | 2 |
Number of DAC channels (#) | 2 |
Digital audio interface | R, L, I2S |
Analog inputs | 2 |
Sampling rate (Max) (kHz) | 192 |
Rating | Catalog |
ADC SNR (Typ) (dB) | 99 |
DAC SNR (Typ) (dB) | 105 |
| |
- 24-Bit Delta-Sigma ADC and DAC
- ADC, DAC Asynchronous Operation
- Stereo ADC:
- High Performance: (Typical, 48 kHz)
- THD+N: -93 dB
- SNR: 99 dB
- Dynamic Range: 99 dB
- Sampling Rate: 16-96 kHz
- System Clock: 256, 384, 512, 768 fS
- Full Scale Input: 3 Vp-p
- Antialiasing Filter Included
- 1/64 Decimation Filter:
- Pass-Band Ripple: ±0.05 dB
- Stop-Band Attenuation: -65 dB
- On-Chip High-Pass Filter: 0.91 Hz at fS = 48 kHz
- High Performance: (Typical, 48 kHz)
- Stereo DAC:
- High Performance: (Typical, Differential, 48 kHz)
- THD+N: -94 dB
- SNR: 105 dB
- Dynamic Range: 104 dB
- Sampling Rate: 16-192 kHz
- System Clock: 128, 192, 256, 384, 512, 768 fS
- Differential Voltage Output: 8 Vp-p
- Single-Ended Voltage Output: 4 Vp-p
- Analog Low-Pass Filter Included
- 4×/8× Oversampling Digital Filter:
- Pass-Band Ripple: ±0.04 dB
- Stop-Band Attenuation: -50 dB
- Zero Flags
- High Performance: (Typical, Differential, 48 kHz)
- Flexible Mode Control
- 3-Wire SPI, 2-Wire I2C Compatible Serial Control Interface
- Hardware Control Mode
- Multiple Functions via SPI or I2C Interface:
- Digital Attenuation and Soft Mute for ADC and DAC
- Digital De-Emphasis: 32, 44.1, 48 kHz for DAC
- Power Down: ADC/DAC Independently
- Asynchronous/Synchronous Control for ADC/DAC Operation
- External Reset and Power-Down Pin:
- ADC/DAC Simultaneously
- Audio Interface Mode:
- ADC/DAC Independent Master/Slave
- Audio Data Format:
- ADC/DAC Independent
- I2S, Left-Justified, Right-Justified
- Dual Power Supplies:
- 5-V for Analog and 3.3-V for Digital
- Package: TSSOP-28
- APPLICATIONS
- DVD-RW
- Digital TV
- Digital Set-Top Box
- Audio-Visual Applications
The PCM3060 is a low-cost, high-performance, single-chip, 24-bit stereo audio codec with single-ended analog inputs and differential analog outputs.
The stereo 24-bit ADC employs a 64-times delta-sigma modulator. It supports 16-96 kHz sampling rates and a 16/24-bit digital audio output word on the audio interface.
The stereo 24-bit DAC employs a 64- or 128-times delta-sigma modulator. It supports 16-192 kHz sampling rates and a 16/24-bit digital audio input word on the audio interface.
The PCM3060 supports fully independent operation of the sampling rate and audio interface for the ADC and DAC.
Each audio interface supports I2S, left-justified, and right-justified formats with 16/24-bit words.
The PCM3060 can be software-controlled through a 3-wire SPI-compatible or 2-wire I2C-compatible serial interface, which provides access to all functions including digital attenuation, soft mute, de-emphasis etc.
The PCM3060 can be also used in hardware mode, which provides three basic functions.
The PCM3060 is fabricated using a highly advanced CMOS process and is available in a small 28-pin TSSOP package.
The PCM3060 is suitable for various sound processing applications for DVD-RW, digital TV, STB, and other AV equipment.
為你推薦
-
TI數字多路復用器和編碼器SN54HC1512022-12-23 15:12
-
TI數字多路復用器和編碼器SN54LS1532022-12-23 15:12
-
TI數字多路復用器和編碼器CD54HC1472022-12-23 15:12
-
TI數字多路復用器和編碼器CY74FCT2257T2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS258A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74AHCT1582022-12-23 15:12
-
【PCB設計必備】31條布線技巧2023-08-03 08:09
相信大家在做PCB設計時,都會發現布線這個環節必不可少,而且布線的合理性,也決定了PCB的美觀度和其生產成本的高低,同時還能體現出電路性能和散熱性能的好壞,以及是否可以讓器件的性能達到最優等。在上篇內容中,小編主要分享了PCB線寬線距的一些設計規則,那么本篇內容,將針對PCB的布線方式,做個全面的總結給到大家,希望能夠?qū)︷B(yǎng)成良好的設計習慣有所幫助。1走線長度1687瀏覽量 -
電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08
-
Buck電路的原理及器件選型指南2023-07-31 22:28
-
100W USB PD 3.0電源2023-07-31 22:27
-
千萬不要忽略PCB設計中線寬線距的重要性2023-07-31 22:27
想要做好PCB設計,除了整體的布線布局外,線寬線距的規則也非常重要,因為線寬線距決定著電路板的性能和穩定性。所以本篇以RK3588為例,詳細為大家介紹一下PCB線寬線距的通用設計規則。要注意的是,布線之前須把軟件默認設置選項設置好,并打開DRC檢測開關。布線建議打開5mil格點,等長時可根據情況設置1mil格點。PCB布線線寬01布線首先應滿足工廠加工能力,1780瀏覽量 -
基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02
-
上新啦!開發板僅需9.9元!2023-06-21 17:43
-
參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43
-
千萬不能小瞧的PCB半孔板2023-06-21 17:34