日本仑乱在线视频,91亚洲精品自在在线观看,av免费网站秘密花园

一、簡介

媒體子系統為開發者提供了媒體相關的很多功能，本文針對其中的視頻錄制功能做個詳細的介紹。首先，我將通過媒體子系統提供的視頻錄制Test代碼作為切入點，給大家梳理一下整個錄制的流程。

二、目錄

foundation/multimedia/camera_framework

├── frameworks
│   ├── js
│   │   └── camera_napi                            #napi實現
│   │       └── src
│   │           ├── input                          #Camera輸入
│   │           ├── output                         #Camera輸出
│   │           └── session                        #會話管理
│   └── native                                     #native實現
│       └── camera
│           ├── BUILD.gn
│           ├── src
│           │   ├── input                          #Camera輸入
│           │   ├── output                         #Camera輸出
│           │   └── session                        #會話管理
├── interfaces                                     #接口定義
│   ├── inner_api                                  #內部native實現
│   │   └── native
│   │       ├── camera
│   │       │   └── include
│   │       │       ├── input
│   │       │       ├── output
│   │       │       └── session
│   └── kits                                       #napi接口
│       └── js
│           └── camera_napi
│               ├── BUILD.gn
│               ├── include
│               │   ├── input
│               │   ├── output
│               │   └── session
│               └── @ohos.multimedia.camera.d.ts
└── services                                       #服務端
    └── camera_service
        ├── binder
        │   ├── base
        │   ├── client                             #IPC的客戶端
        │   │   └── src
        │   └── server                             #IPC的服務端
        │       └── src
        └── src

三、錄制的總體流程

四、Native接口使用

在OpenAtom OpenHarmony（以下簡稱“OpenHarmony”）系統中，多媒體子系統通過N-API接口提供給上層JS調用，N-API相當于是JS和Native之間的橋梁，在OpenHarmony源碼中，提供了C++直接調用視頻錄制功能的例子，foundation/multimedia/camera_framework/interfaces/inner_api/native/test目錄中。本文章主要參考了camera_video.cpp文件中的視頻錄制流程。

首先根據camera_video.cpp的main方法，了解下視頻錄制的主要流程代碼。

int main(int argc, char **argv)
{
    ......


    // 創建CameraManager實例
    sptr camManagerObj = CameraManager::GetInstance();


    // 設置回調
    camManagerObj->SetCallback(std::make_shared(testName));


    // 獲取支持的相機設備列表
    std::vector> cameraObjList = camManagerObj->GetSupportedCameras();


    // 創建采集會話
    sptr captureSession = camManagerObj->CreateCaptureSession();


    // 開始配置采集會話
    captureSession->BeginConfig();


    // 創建CameraInput
    sptr captureInput = camManagerObj->CreateCameraInput(cameraObjList[0]);
    sptr cameraInput = (sptr &)captureInput;


    // 開啟CameraInput
    cameraInput->Open();


    // 設置CameraInput的Error回調
    cameraInput->SetErrorCallback(std::make_shared(testName));


    // 添加CameraInput實例到采集會話中
    ret = captureSession->AddInput(cameraInput);


    sptr videoSurface = nullptr;
    std::shared_ptr recorder = nullptr;


    // 創建Video的Surface
    videoSurface = Surface::CreateSurfaceAsConsumer();


    sptr videoListener = new SurfaceListener("Video", SurfaceType::VIDEO, g_videoFd, videoSurface);


    // 注冊Surface的事件監聽
    videoSurface->RegisterConsumerListener((sptr &)videoListener);


    // 視頻的配置
    VideoProfile videoprofile = VideoProfile(static_cast(videoFormat), videosize, videoframerates);


    // 創建VideoOutput實例
    sptr videoOutput = camManagerObj->CreateVideoOutput(videoprofile, videoSurface);


    // 設置VideoOutput的回調
    ((sptr &)videoOutput)->SetCallback(std::make_shared(testName));


    // 添加videoOutput到采集會話中
    ret = captureSession->AddOutput(videoOutput);


    // 提交會話配置
    ret = captureSession->CommitConfig();


    // 開始錄制
    ret = ((sptr &)videoOutput)->Start();




    sleep(videoPauseDuration);
    MEDIA_DEBUG_LOG("Resume video recording");
    // 暫停錄制
    ret = ((sptr &)videoOutput)->Resume();


    MEDIA_DEBUG_LOG("Wait for 5 seconds before stop");
    sleep(videoCaptureDuration);
    MEDIA_DEBUG_LOG("Stop video recording");
    // 停止錄制
    ret = ((sptr &)videoOutput)->Stop();


    MEDIA_DEBUG_LOG("Closing the session");
    // 停止采集會話
    ret = captureSession->Stop();


    MEDIA_DEBUG_LOG("Releasing the session");
    // 釋放會話采集
    captureSession->Release();


    // Close video file
    TestUtils::SaveVideoFile(nullptr, 0, VideoSaveMode::CLOSE, g_videoFd);
    cameraInput->Release();
    camManagerObj->SetCallback(nullptr);
    return 0;
}

以上是視頻錄制的整體流程，其過程主要通過Camera模塊支持的能力來實現，其中涉及幾個重要的類：CaptureSession、CameraInput、VideoOutput。CaptureSession是整個過程的控制者，CameraInput和VideoOutput相當于是設備的輸入和輸出。

五、調用流程

后續主要針對上面的調用流程，梳理具體的調用流程，方便我們對了解視頻錄制的整理架構有一個更加深入的了解。

創建CameraManager實例

通過CameraManager::GetInstance()獲取CameraManager的實例，后續的一些接口都是通過該實例進行調用的。GetInstance使用了單例模式，在OpenHarmony代碼中這種方式很常見。

sptr &CameraManager::GetInstance()
{
    if (CameraManager::cameraManager_ == nullptr) {
        MEDIA_INFO_LOG("Initializing camera manager for first time!");
        CameraManager::cameraManager_ = new(std::nothrow) CameraManager();
        if (CameraManager::cameraManager_ == nullptr) {
            MEDIA_ERR_LOG("CameraManager::GetInstance failed to new CameraManager");
        }
    }
    return CameraManager::cameraManager_;
}

獲取支持的相機設備列表

通過調用CameraManager的GetSupportedCameras()接口，獲取設備支持的CameraDevice列表。跟蹤代碼可以發現serviceProxy_->GetCameras最終會調用到Camera服務端的對應接口。

std::vector> CameraManager::GetSupportedCameras()
{
    CAMERA_SYNC_TRACE;


    std::lock_guard lock(mutex_);
    std::vector cameraIds;
    std::vector> cameraAbilityList;
    int32_t retCode = -1;
    sptr cameraObj = nullptr;
    int32_t index = 0;


    if (cameraObjList.size() > 0) {
        cameraObjList.clear();
    }
    if (serviceProxy_ == nullptr) {
        MEDIA_ERR_LOG("CameraManager::GetCameras serviceProxy_ is null, returning empty list!");
        return cameraObjList;
    }
    std::vector> supportedCameras;
    retCode = serviceProxy_->GetCameras(cameraIds, cameraAbilityList);
    if (retCode == CAMERA_OK) {
        for (auto& it : cameraIds) {
            cameraObj = new(std::nothrow) CameraDevice(it, cameraAbilityList[index++]);
            if (cameraObj == nullptr) {
                MEDIA_ERR_LOG("CameraManager::GetCameras new CameraDevice failed for id={public}%s", it.c_str());
                continue;
            }
            supportedCameras.emplace_back(cameraObj);
        }
    } else {
        MEDIA_ERR_LOG("CameraManager::GetCameras failed!, retCode: %{public}d", retCode);
    }


    ChooseDeFaultCameras(supportedCameras);
    return cameraObjList;
}

創建采集會話

下面是比較重要的環節，通過調用CameraManager的CreateCaptureSession接口創建采集會話。CameraManager創建采集會話，是通過serviceProxy_->CreateCaptureSession方式進行調用，這里涉及到了OpenHarmony中的IPC的調用，serviceProxy_是遠端服務在本地的代理，通過這個代理可以調用到具體的服務端，這里是HCameraService。

sptr CameraManager::CreateCaptureSession()
{
    CAMERA_SYNC_TRACE;
    sptr captureSession = nullptr;
    sptr result = nullptr;
    int32_t retCode = CAMERA_OK;


    if (serviceProxy_ == nullptr) {
        MEDIA_ERR_LOG("CameraManager::CreateCaptureSession serviceProxy_ is null");
        return nullptr;
    }
    retCode = serviceProxy_->CreateCaptureSession(captureSession);
    if (retCode == CAMERA_OK && captureSession != nullptr) {
        result = new(std::nothrow) CaptureSession(captureSession);
        if (result == nullptr) {
            MEDIA_ERR_LOG("Failed to new CaptureSession");
        }
    } else {
        MEDIA_ERR_LOG("Failed to get capture session object from hcamera service!, %{public}d", retCode);
    }
    return result;
}

代碼最終來到HCameraService::CreateCaptureSession中，該方法中new了一個HCaptureSession對象，并且將該對象傳遞給了參數session，所以前面的captureSession對象就是這里new出來的HCaptureSession，前面的CameraManager的CreateCaptureSession()方法中將captureSession封裝成CaptureSession對象返回給應用層使用。

int32_t HCameraService::CreateCaptureSession(sptr &session)
{
    CAMERA_SYNC_TRACE;
    sptr captureSession;
    if (streamOperatorCallback_ == nullptr) {
        streamOperatorCallback_ = new(std::nothrow) StreamOperatorCallback();
        if (streamOperatorCallback_ == nullptr) {
            MEDIA_ERR_LOG("HCameraService::CreateCaptureSession streamOperatorCallback_ allocation failed");
            return CAMERA_ALLOC_ERROR;
        }
    }


    std::lock_guard lock(mutex_);
    OHOS::AccessTokenID callerToken = IPCSkeleton::GetCallingTokenID();
    captureSession = new(std::nothrow) HCaptureSession(cameraHostManager_, streamOperatorCallback_, callerToken);
    if (captureSession == nullptr) {
        MEDIA_ERR_LOG("HCameraService::CreateCaptureSession HCaptureSession allocation failed");
        return CAMERA_ALLOC_ERROR;
    }
    session = captureSession;
    return CAMERA_OK;
}

開始配置采集會話

調用CaptureSession的BeginConfig進行采集會話的配置工作。這個工作最終調用到被封裝的HCaptureSession中。

int32_t HCaptureSession::BeginConfig()
{
    CAMERA_SYNC_TRACE;
    if (curState_ == CaptureSessionState::SESSION_CONFIG_INPROGRESS) {
        MEDIA_ERR_LOG("HCaptureSession::BeginConfig Already in config inprogress state!");
        return CAMERA_INVALID_STATE;
    }
    std::lock_guard lock(sessionLock_);
    prevState_ = curState_;
    curState_ = CaptureSessionState::SESSION_CONFIG_INPROGRESS;
    tempCameraDevices_.clear();
    tempStreams_.clear();
    deletedStreamIds_.clear();
    return CAMERA_OK;
}

創建CameraInput

應用層通過camManagerObj->CreateCameraInput(cameraObjList[0])的方式進行CameraInput的創建，cameraObjList[0]就是前面獲取支持設備的第一個。根據CameraDevice創建對應的CameraInput對象。

sptr CameraManager::CreateCameraInput(sptr &camera)
{
    CAMERA_SYNC_TRACE;
    sptr cameraInput = nullptr;
    sptr deviceObj = nullptr;


    if (camera != nullptr) {
        deviceObj = CreateCameraDevice(camera->GetID());
        if (deviceObj != nullptr) {
            cameraInput = new(std::nothrow) CameraInput(deviceObj, camera);
            if (cameraInput == nullptr) {
                MEDIA_ERR_LOG("failed to new CameraInput Returning null in CreateCameraInput");
                return cameraInput;
            }
        } else {
            MEDIA_ERR_LOG("Returning null in CreateCameraInput");
        }
    } else {
        MEDIA_ERR_LOG("CameraManager: Camera object is null");
    }
    return cameraInput;
}

開啟CameraInput

調用了CameraInput的Open方法，進行輸入設備的啟動打開。

void CameraInput::Open()
{
    int32_t retCode = deviceObj_->Open();
    if (retCode != CAMERA_OK) {
        MEDIA_ERR_LOG("Failed to open Camera Input, retCode: %{public}d", retCode);
    }
}

添加CameraInput實例到采集會話中

通過調用captureSession的AddInput方法，將創建的CameraInput對象添加到采集會話的輸入中，這樣采集會話就知道采集輸入的設備。

int32_t CaptureSession::AddInput(sptr &input)
{
    CAMERA_SYNC_TRACE;
    if (input == nullptr) {
        MEDIA_ERR_LOG("CaptureSession::AddInput input is null");
        return CAMERA_INVALID_ARG;
    }
    input->SetSession(this);
    inputDevice_ = input;
    return captureSession_->AddInput(((sptr &)input)->GetCameraDevice());
}

最終調用到HCaptureSession的AddInput方法，該方法中核心的代碼是tempCameraDevices_.emplace_back(localCameraDevice)，將需要添加的CameraDevice插入到tempCameraDevices_容器中。

int32_t HCaptureSession::AddInput(sptr cameraDevice)
{
    CAMERA_SYNC_TRACE;
    sptr localCameraDevice = nullptr;


    if (cameraDevice == nullptr) {
        MEDIA_ERR_LOG("HCaptureSession::AddInput cameraDevice is null");
        return CAMERA_INVALID_ARG;
    }
    if (curState_ != CaptureSessionState::SESSION_CONFIG_INPROGRESS) {
        MEDIA_ERR_LOG("HCaptureSession::AddInput Need to call BeginConfig before adding input");
        return CAMERA_INVALID_STATE;
    }
    if (!tempCameraDevices_.empty() || (cameraDevice_ != nullptr && !cameraDevice_->IsReleaseCameraDevice())) {
        MEDIA_ERR_LOG("HCaptureSession::AddInput Only one input is supported");
        return CAMERA_INVALID_SESSION_CFG;
    }
    localCameraDevice = static_cast(cameraDevice.GetRefPtr());
    if (cameraDevice_ == localCameraDevice) {
        cameraDevice_->SetReleaseCameraDevice(false);
    } else {
        tempCameraDevices_.emplace_back(localCameraDevice);
        CAMERA_SYSEVENT_STATISTIC(CreateMsg("CaptureSession::AddInput"));
    }


    sptr streamOperator;
    int32_t rc = localCameraDevice->GetStreamOperator(streamOperatorCallback_, streamOperator);
    if (rc != CAMERA_OK) {
        MEDIA_ERR_LOG("HCaptureSession::GetCameraDevice GetStreamOperator returned %{public}d", rc);
        localCameraDevice->Close();
        return rc;
    }
    return CAMERA_OK;
}

創建Video的Surface

通過Surface::CreateSurfaceAsConsumer創建Surface。

sptr Surface::string name, bool isShared)
{
    sptr surf = new ConsumerSurface(name, isShared);
    GSError ret = surf->Init();
    if (ret != GSERROR_OK) {
        BLOGE("Failure, Reason: consumer surf init failed");
        return nullptr;
    }
    return surf;
}

創建VideoOutput實例

通過調用CameraManager的CreateVideoOutput來創建VideoOutput實例。

sptr CameraManager::CreateVideoOutput(VideoProfile &profile, sptr &surface)
{
    CAMERA_SYNC_TRACE;
    sptr streamRepeat = nullptr;
    sptr result = nullptr;
    int32_t retCode = CAMERA_OK;
    camera_format_t metaFormat;


    metaFormat = GetCameraMetadataFormat(profile.GetCameraFormat());
    retCode = serviceProxy_->CreateVideoOutput(surface->GetProducer(), metaFormat,
                                               profile.GetSize().width, profile.GetSize().height, streamRepeat);
    if (retCode == CAMERA_OK) {
        result = new(std::nothrow) VideoOutput(streamRepeat);
        if (result == nullptr) {
            MEDIA_ERR_LOG("Failed to new VideoOutput");
        } else {
            std::vector videoFrameRates = profile.GetFrameRates();
            if (videoFrameRates.size() >= 2) { // vaild frame rate range length is 2
                result->SetFrameRateRange(videoFrameRates[0], videoFrameRates[1]);
            }
            POWERMGR_SYSEVENT_CAMERA_CONFIG(VIDEO,
                                            profile.GetSize().width,
                                            profile.GetSize().height);
        }
    } else {
        MEDIA_ERR_LOG("VideoOutpout: Failed to get stream repeat object from hcamera service! %{public}d", retCode);
    }
    return result;
}

該方法中通過IPC的調用最終調用到了HCameraService的CreateVideoOutput(surface->GetProducer(), format, streamRepeat)。

sptr CameraManager::CreateVideoOutput(VideoProfile &profile, sptr &surface)
{
    CAMERA_SYNC_TRACE;
    sptr streamRepeat = nullptr;
    sptr result = nullptr;
    int32_t retCode = CAMERA_OK;
    camera_format_t metaFormat;


    metaFormat = GetCameraMetadataFormat(profile.GetCameraFormat());
    retCode = serviceProxy_->CreateVideoOutput(surface->GetProducer(), metaFormat,
                                               profile.GetSize().width, profile.GetSize().height, streamRepeat);
    if (retCode == CAMERA_OK) {
        result = new(std::nothrow) VideoOutput(streamRepeat);
        if (result == nullptr) {
            MEDIA_ERR_LOG("Failed to new VideoOutput");
        } else {
            std::vector videoFrameRates = profile.GetFrameRates();
            if (videoFrameRates.size() >= 2) { // vaild frame rate range length is 2
                result->SetFrameRateRange(videoFrameRates[0], videoFrameRates[1]);
            }
            POWERMGR_SYSEVENT_CAMERA_CONFIG(VIDEO,
                                            profile.GetSize().width,
                                            profile.GetSize().height);
        }
    } else {
        MEDIA_ERR_LOG("VideoOutpout: Failed to get stream repeat object from hcamera service! %{public}d", retCode);
    }
    return result;
}

HCameraService的CreateVideoOutput方法中主要創建了HStreamRepeat，并且通過參數傳遞給前面的CameraManager使用，CameraManager通過傳遞的HStreamRepeat對象，進行封裝，創建出VideoOutput對象。

添加videoOutput到采集會話中，并且提交采集會話

該步驟類似添加CameraInput到采集會話的過程，可以參考前面的流程。

開始錄制

通過調用VideoOutput的Start進行錄制的操作。

int32_t VideoOutput::Start()
{
    return static_cast(GetStream().GetRefPtr())->Start();
}

該方法中會調用到HStreamRepeat的Start方法。

int32_t HStreamRepeat::Start()
{
    CAMERA_SYNC_TRACE;


if (streamOperator_ == nullptr) {
return CAMERA_INVALID_STATE;
    }
if (curCaptureID_ != 0) {
        MEDIA_ERR_LOG("HStreamRepeat::Start, Already started with captureID: %{public}d", curCaptureID_);
return CAMERA_INVALID_STATE;
    }
int32_t ret = AllocateCaptureId(curCaptureID_);
if (ret != CAMERA_OK) {
        MEDIA_ERR_LOG("HStreamRepeat::Start Failed to allocate a captureId");
return ret;
    }
std::vector ability;
    OHOS::ConvertMetadataToVec(cameraAbility_, ability);
    CaptureInfo captureInfo;
    captureInfo.streamIds_ = {streamId_};
    captureInfo.captureSetting_ = ability;
    captureInfo.enableShutterCallback_ = false;
    MEDIA_INFO_LOG("HStreamRepeat::Start Starting with capture ID: %{public}d", curCaptureID_);
    CamRetCode rc = (CamRetCode)(streamOperator_->Capture(curCaptureID_, captureInfo, true));
if (rc != HDI::NO_ERROR) {
        ReleaseCaptureId(curCaptureID_);
        curCaptureID_ = 0;
        MEDIA_ERR_LOG("HStreamRepeat::Start Failed with error Code:%{public}d", rc);
        ret = HdiToServiceError(rc);
    }
return ret;
}

核心的代碼是streamOperator_->Capture，其中最后一個參數true，表示采集連續數據。

錄制結束，保存錄制文件

六、總結

本文主要對OpenHarmony 3.2 Beta多媒體子系統的視頻錄制進行介紹，首先梳理了整體的錄制流程，然后對錄制過程中的主要步驟進行了詳細地分析。視頻錄制主要分為以下幾個步驟：

（1）獲取CameraManager實例。

（2）創建采集會話CaptureSession。

（3）創建CameraInput實例，并且將輸入設備添加到CaptureSession中。

（4）創建Video錄制需要的Surface。

（5）創建VideoOutput實例，并且將輸出添加到CaptureSession中。

（6）提交采集會話的配置。

（7）調用VideoOutput的Start方法，進行視頻的錄制。

（8）錄制結束，保存錄制的文件。

更多熱點文章閱讀

基于 OpenHarmony 的智能電磁炮
【我的2022】堅果：我和OpenHarmony的這一年
OpenHarmony小型系統兼容性測試指南
玩轉OpenHarmony社交場景：即時通訊平臺
龍芯 2K500 開發板 Linux環境基礎調教和使用

原文標題：OpenHarmony 3.2 Beta多媒體系列：視頻錄制

文章出處：【微信公眾號：電子發燒友開源社區】歡迎添加關注！文章轉載請注明出處。

聲明：本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人，不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用，如有內容侵權或者其他違規問題，請聯系本站處理。舉報投訴